Walk the floor at BDNY — the Boutique Design New York show — and one thing is unmistakable: printed walls have become the hotel industry’s default feature wall.
That expectation is what separates a good print job from a failed specification. The wallcovering behind the print has to carry the traffic, the cleaning and the scrutiny. In this first of two reports from the BDNY 2026 show floor, we look at what we saw in the market — printable Type II wallcovering and metallic media — and what it means for the people who print on them.
The mural is the default feature wall now
At the Blue Leaf Hospitality booth, the feature wall was a full-height scenic mural — a photographic landscape with water, mountains and trees. It reads like art, but it is a wallcovering: printed, finished and installed as a wall.

For a print shop, the opportunity is obvious. Any hotel that wants a signature wall can now commission one — a view of its own city, a brand pattern, an artist’s work — and have it printed to size. The printer’s challenge is that the mural only sells once. It has to be installed well, stay looking new, and not be the reason the designer gets a call from an unhappy hotel.
Why the base has to be Type II
Type II is the commercial workhorse class of wallcovering. It is the spec that survives corridors, lobbies, restaurants and lifts, because its vinyl face accepts impact and regular cleaning. When a designer at the show asked us how to choose a base for a printed mural, we did not talk about printers first. We talked about the wall: its traffic, what hits it, how often it will be wiped down — and then, whether the base can be printed well on.
- The image: a coated print surface that takes digital artwork cleanly, at mural scale.
- The performance: a heavy-duty vinyl face that tolerates impact, abrasion and repeated cleaning in a way paper and light non-woven media cannot.
This is also where the conversation with printers starts. At the show, a printer’s first questions are the same as ours: what is the backing, how wide is the print, and will the inks sit on this surface the way they do on the printer’s own tests? Most print-line questions, we’ve found, are really material questions: whether the media is Type II, what the backing is, and whether cleanability is built in rather than added on.

Digital print studios such as Astek are not short of ideas — custom maps, illustrations and patterns printed to wall size. What they need from a media supplier is a base that will stay specified. A beautiful custom print that lifts at the edges after a year is not a reorder.

Metallic effects: the shortcut to a luxury read
The second pattern on the floor was shine. Gold, silver and bronze effects — woven into metallic grounds, printed from digital files, or built up with foil printing and relief patterns — were the fastest way a plain wall communicated ‘luxury’ to a design buyer.


Metallic effects earn their place in hospitality because they read as expensive under low light — a hotel lobby, a bar, a restaurant at dinner service — without needing the cost and weight of a real metal finish. If a metallic ground is the brief, our advice is the same as for a printed mural: check the cleanability and the seam behaviour before you commit to the finish, because a metallic surface shows a bad seam before anything else does.
What this means for printers choosing a media supplier
Three checks decide whether a printable substrate will hold up in this market:
- Match the class to the space. Type II for corridors and high-traffic commercial walls; lighter media only where traffic and cleaning are genuinely low.
- Fix the width to your printer and your walls. Our printable range runs 1.06–1.37 m wide (customizable), with backings in wood-pulp paper, non-woven, fabric and spunlace — choose the backing for the printer and the hanging method, not by habit.
- Test on your own machine before you quote the job. Ink behaviour is machine- and ink-specific. We supply free samples to qualified print buyers for exactly this reason — run your artwork, check adhesion and colour, then commit.
Bauhinia’s printable wallcovering media (the ZHC5 range) is built for this work: PVC-coated print surfaces on a choice of backings, 300 gsm standard with weight and roll length customizable, from 300 m per design. Browse the range on our Digital Printing page, or request free samples matched to your print line.
Photos from BDNY 2026, New York, by Bauhinia Walls. Exhibitor displays are shown as market references; they are not Bauhinia products.


